Subject: upgrade of a D-Link DWL-520 Rev. B1 card From: "Kjell M. Myksvoll" To: jsun@junsun.net Date: Sun, 09 Jan 2005 23:54:13 +0000 Hi, Followed your description upgrading a D-Link DWL-520 Rev. B1 card from 1.3.4 to 1.7.4 using the hex files on your web-page. Got some messages saying Plugging PDR 0x0406 at 0x007f16da (len=2) PDR 0x0406 not found from wlan card PDA. Using default data. len=2: 64 00 but I suppose that this is just informational. I also tried to upgrade the station firmware to ver. 1.8.0 by using a hex file from http://www.red-bean.com/~proski/firmware, but during the test run I got one message saying Plugging PDR 0x0413 at 0x0000118e (len=2) Could not find data position for plugging PDR 0x0413 at 0x0000118e (len=2) PDR 0x0413 is not in wlan card PDA and there is no default data. Ignoring plug record. I suppose that this message is just informational and that the card would work well after an upgrade to 1.8.0. But for the time beeing I think I'll stay with 1.7.4 (as WPA support only seems to require 1.7.0 or better). Anyway, thanks for your web-page. Most helpful! best regards, kmm